Application areas
Widely used in mechanical equipment to be protected, such as storage tanks, containers, pipes, brackets, steel parts and other metal rust preservative treatment, and a variety of decorative effects need to finish the metal surface coating.
Product Features
Strong adhesion, high film hardness;
Excellent weatherability, anti-rust performance;
Water-based environmental protection;
Simple construction, can be painted with rust;

Construction technology
Process
Technical specifications
The main material
Substrate processing
Polished clean metal surface foreign body and rust, oil treatment of metal surface, to achieve standard rust ST2, rust coating
 
Primer coating
Brush or spray according to the effect of adding 5-15% of the volume of the coating of water Stir, in accordance with the film drying interval, brushing 2-3
BA-601D water-based anti-rust paint
note:
Construction conditions: temperature above 5 ℃, below 45 ℃, humidity below 85%, rain and snow weather can not be constructed, or fail to reach the expected coating effect;

Technical Parameters
 
Test items
 
index
In the container state
Stir evenly without lumps
Freeze-thaw stability (3 cycles)
Not degenerate
Drying time
Table dry, h
≤2
Hard work, h
≤24
Coating appearance
normal
Storage stability (50 ℃ / 7d)
No abnormality
Bending resistance, mm
≤2
Impact resistance, cm · kg
≥40
Adhesion / level (cross-hatching, cross-hatch spacing 1 mm)
≤1
Pencil hardness
≥HB
Water resistance / h
168h does not blister, does not fall off, allowing slight discoloration
Salt water resistance (3% NaCl solution)
96h No blistering, no rusting, slight discoloration allowed
Salt spray
96h no blistering, rust, cracking, peeling phenomenon